Le bras est interchangeable. Poids maxi de l’appareil 4 kg. Livré avec un éclairage fluo lumière du jour RB5000 2x36w et une pochette de 3 chartes gris/blanc/noir QPCARD101.

Loupe with high-quality lens, fully color corrected, free of visible aberrations. Dioptre compensation for individual eyesight adjustment. Exchangeable attachments for transmitted and reflected light originals. Metallic-design mount. Neck cord included. Magnification: 4 x

Loupe with high-quality lens, fully color corrected, free of visible aberrations. Dioptre compensation for individual eyesight adjustment. Exchangeable attachments for transmitted and reflected light originals. Metallic-design mount. Neck cord included. Magnification: 8 x

Special magnifier with 10x magnification and coated four-element system for surface inspection in forensic and legal applications and in material and printing technology. Comprises two lighting systems for diffuse reflective and for dark field illumination for inspection of structures.

Battery (included): P 23 GA (Varta) or similar
Dimensions (W x H x D): 53 x 44 x 45 mm (2.1 x 1.7 x 1.8 in.)
Lens diameter: 23 mm (0.9 in.)

To operate the 2420 and 2421 „slimlite“ light boxes on the mains.

Extremely flat, compact and handy daylight light box. Uniform illumination as a result of special light conducting and reflecting technology in conjunction with cold-cathode fluorescent tubes.

Illuminated area approx 4 x 5" (10 x 12.5 cm)

For battery (6xAAA) or mains operation (mains adapter 2419 available as an accessory). Protective cover included.

Extremely flat, compact and handy daylight light box. Uniform illumination as a result of special light conducting and reflecting technology in conjunction with cold-cathode fluorescent tubes.

Illuminated area approx 5 x 7" (13 x 18 cm)

For battery (6xAA) or mains operation (mains adapter 2419 available as an accessory). Protective cover included.

Extremely flat, compact and handy daylight light box. Uniform illumination as a result of special light conducting and reflecting technology in conjunction with cold-cathode fluorescent tubes. Fold-out feet and clamping strip.

Illuminated area approx 8 x 12" (20 x 30 cm)

Mains operation only, mains adapter included.  Protective cover included.

Table lumineuse « profile basic 2 HF » Surface d'éclairement 30 x 21 cm, Dimensions : 33,5 x 6 x 27,5 cm, 2 x 8 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2146

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "profile basic 2 HF"Surface d'éclairement 50 x 30 cm, Dimensions : 56 x 6 x 36,5 cm, 2 x 13 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2136

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "profile basic 2 HF"Surface d'éclairement 50 x 60 cm, Dimensions : 56 x 6 x 66,5 cm, 4 x 13 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2136

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "profile basic 2 HF" avec variateur. Surface d'éclairement 30 x 21 cm, Dimensions : 33,5 x 6 x 27,5 cm, 2 x 8 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2146

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "profile basic 2 HF" avec variateurSurface d'éclairement 50 x 30 cm, Dimensions : 56 x 6 x 36,5 cm, 2 x 13 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2136

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "profile basic 2 HF" avec variateurSurface d'éclairement 50 x 60 cm, Dimensions : 56 x 6 x 66,5 cm, 4 x 13 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2136

5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.
Sorting attachment for 30 or 70 mounted 35mm slides (only for light boxes with a viewing area of 30 x 21 cm (11.8 x 8.3 in.) and 50 x 30 cm (19.7 x 11.8 in.), 2 m (6 ft. 7 in.) power supply cable.

Table lumineuse "Prolite scan SC"Surface d'éclairement 48 x 44 cm, Dimensions : 63 x 9 x 53,5 cm, 4 x 55 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2414 (par 1) ou 2487 (par 4)

Professional light box for transparent originals of all types, e.g. slides, negatives, X-rays and microfiches. Color temperature 5000 Kelvin. Four Dulux fluorescent lamps with high color reproduction quality CRI = 90-100. Very high lighting power: approx. 50.000 lux. High-frequency operation system (frequency approx. 40 kHz) for flicker-free start-up and running. So especially suitable as backlight source for use with camera scanners. There are also no stroboscopic effects, hum and induction infererence. Very quite vibration-free fan cooling permits unlimited continuous operation with minimum heating of the viewing surface. Operating hours counter. Cm and inch scales on the working surface. Non-slip rubber feet. Can be wall-mounted. On/off switch. Cord 2.5 m (8.2 ft.).

Illuminated area: approx. 48 x 44 cm (18.9 x 17.3 in.) Lamps: 4 x 55 W, 5400 K
Dimensions (WxHxD): approx. 63 x 9 x 53,5 cm (24.8 x 3.5 x 21.1 in.)

Table lumineuse "Prolite scan SC" avec variateur. Surface d'éclairement 48 x 44 cm, Dimensions : 63 x 9 x 53,5 cm, 4 x 55 W, 5000 K, alimentation Haute fréquence environ 40 kHz, 230 V; Lampe de remplacement: Ref. 2414 (par 1) ou 2487 (par 4)

Professional light box for transparent originals of all types, e.g. slides, negatives, X-rays and microfiches. Color temperature 5000 Kelvin. Four Dulux fluorescent lamps with high color reproduction quality CRI = 90-100. Very high lighting power: approx. 50.000 lux. High-frequency operation system (frequency approx. 40 kHz) for flicker-free start-up and running. So especially suitable as backlight source for use with camera scanners. There are also no stroboscopic effects, hum and induction infererence. Very quite vibration-free fan cooling permits unlimited continuous operation with minimum heating of the viewing surface. Operating hours counter. Cm and inch scales on the working surface. Non-slip rubber feet. Can be wall-mounted. On/off switch. Cord 2.5 m (8.2 ft.).

Illuminated area: approx. 48 x 44 cm (18.9 x 17.3 in.) Lamps: 4 x 55 W, 5400 K
Dimensions (WxHxD): approx. 63 x 9 x 53,5 cm (24.8 x 3.5 x 21.1 in.)

With E 27 screw-in thread. 150 W, 3200 K

Battery-powered all-purpose thermometer with LCD display. Four-figure temperature display, switchable from °C to °F. Fast and normal temperature reading option (reading interval 2 sec. and 10 sec.). Settable minimum and maximum temperature, acoustic signal if exceeded or below. Count-down timer. Time interval up to 99 hrs. 59 min. max. Stainless steel temperature sensor with 1 m cable. With pocket clip, hanger eyelet and stand bracket. 

Reading range: -50° ... +260° C (-58 ° ... +500° F)
Battery: 1.5 V Micro/AAA (included)
Dimensions (without sensor): approx.105 x 19 x 66 mm  (4.1 x .7 x 2.6 in.)

Massicot Kaiser Multi Cut 2 type guillotine 46 cm, dimensions base : 46 x 16,5 cm

Illuminates a broad area with 20 selected LED’s especially adapted to negative-positive processes. The emitted light lies in the narrow spectral range around 590 nm in which most colour papers are insensitive. Also suited to variable contrast printing paper. Adjustment knob for controlling brightness. Removable special filter for greater brightness in the B & W lab. Dull black housing. Top can be tilted from 0 to 40°. Mounting on wall can be done for direct or indirect lighting of working area. 

Cord: approx. 1.8 m (6 ft.)
Dimensions: approx. 150 x 110 x 90 mm (5.9 x 4.3 x 3.5 in.)

Kaiser Micro Cut, longueur de coupe : 15 cm, capacité de coupe : 0,5 mm, dimensions base : 24 x 5,5 x 13 cm

Kaiser Mini Cut, longueur de coupe : 25 cm, capacité de coupe : 0,5 mm, dimensions base : 36 x 7 x 21 cm

Kaiser Easy Cut 2, longueur de coupe : 45 cm, capacité de coupe : 0,8 mm, dimensions base : 57 x 7 x 19 cm

Kaiser Hobby Cut 1, longueur de coupe : 32 cm, capacité de coupe : 0,5 mm, dimensions base : 43 x 7 x 21 cm

Kaiser Hobby Cut 1 courbe, identique à Ref. 4308 (32 cm) avec tête de coupe supplémentaire pour coupe "courbe". Longueur de coupe : 32 cm, capacité de coupe : 0,5 mm, dimensions base : 43 x 7 x 21 cm

Kaiser Hobby Cut 1 "courbe" & "zig-zag", identique à Ref. 4308 (32 cm) avec têtes de coupe supplémentaires pour coupe "courbe" & "zig-zag". Longueur de coupe : 32 cm, capacité de coupe : 0,5 mm, dimensions base : 43 x 7 x 21 cm

Kaiser Set de 3 têtes de coupe spéciale pour "hobby cut 1" comprenant : coupe perforée, coupe courbe et coupe zig-zag

Kaiser Mini coupeuse, longueur de coupe : 31 cm, capacité de coupe : 0,5 mm, livrée avec 3 têtes (coupe droite, coupe perforée et coupe zig-zag)

Kaiser coupeuse Pro "profi cut 1", longueur de coupe : 36 cm, capacité de coupe : 2 mm, dimensions base : 55,5 x 9,2 x 36,7 cm

Kaiser coupeuse Pro "profi cut 2", longueur de coupe : 51 cm, capacité de coupe : 2 mm, dimensions base :

70,5 x 9,2 x 36,7 cm

Kaiser coupeuse Pro "profi cut 3", longueur de coupe : 72 cm, capacité de coupe : 2 mm, dimensions base : 91,5 x 9,2 x 36,7 cm

• For all film formats up to 24 x 36 mm (35 mm) and lenses up to 50 mm focal length.
• Removable compound negative carrier with with negative masks for 24 x 36 mm and 5 x 5 cm (2 x 2") framed slides.
• Wall and floor projection.
• Enlarger head with 75 watt opal lamp, lamp adjustable.
• Single condenser system.
• Filter drawer can be retrofit.
• Built-in red filter.
• Height adjustment by hand-crank operated friction drive.
• Supplied without lens.
• Baseboard dimensions approx. 40 x 42 x 2.5 cm (15.7 x 16.5 x 1 in.).
• Height of column approx. 76 cm (30 in.).
• Maximum enlargement on baseboard: 24 x 30 cm (9.5 x 12 in.).

• For all film formats up to 24 x 36 mm (35 mm) and lenses up to 50 mm focal length.
• Can be upgraded to film formats up to 6 x 9 cm.
• Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins.
• Inserts supplied: format masks for 35 mm film
• Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle.
• Enlarger head with 75 watt opal lamp, lamp adjustable.
• Exchangeable double condenser system.
• Filter drawer.
• Built-in red filter
• Quick-change attachment for lenses.
• Height adjustment by hand-crank operated friction drive.
• Supplied without lens.

Inrush current limiter and electronic voltage stabilizer for compensation of voltage deviations (for constant color temperature).

Specifications:

Input     230 V + 10%/-15%, 50 Hz

Output 11.5 V +/-1%, 50 Hz

Output power     100 watt

Fuse     1.6 amp quick-blow

For Kaiser enlarger heads with 100 watt halogen lamp.

Specifications

Input     230 V, 50 Hz

Output 12 V, 50 Hz

Output power     100 watt

Fuse     1.6 amp quick-blow

• For all film formats up to 6 x 6 cm and lenses up to 80 mm focal length.
• Can be upgraded to film formats up to 6 x 9 cm.
• Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins.
• Inserts supplied: Anti-Newton glass on top, 6 x 6 format mask on bottom
• Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle.
• Enlarger head with 75 watt opal lamp, lamp adjustable.
• Exchangeable double condenser system.
• Filter drawer.
• Built-in red filter
• Quick-change attachment for lenses.
• Height adjustment by hand-crank operated friction drive.
• Supplied without lens.

• For all film formats up to 6 x 7 cm  and lenses up to 105  mm focal length.
• Can be upgraded to film formats up to 6 x 9 cm.
• Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins.
• Inserts supplied: Anti-Newton glass on top, 6 x 7 format mask on bottom.
• Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle.
• Enlarger head with 75 watt opal lamp, lamp adjustable.
• Exchangeable double condenser system.
• Filter drawer.
• Built-in red filter
• Quick-change attachment for lenses.
• Height adjustment by hand-crank operated friction drive with weight compensation by roll-off spring mechanism.
• Manual fine focusing.
• Filter holder for square filters can be swung out and height-adjusted, with diffusor screen for integral metering.
• Supplied without lens.

Composé d'un flexible 5039 de 55 cm pouvant supporter jusqu'à 600 g, d'une rotule 6018 de 30 mm de base au pas de 1/4”. Une pince de table 5043 permet un serrage jusqu'à 30 mm sur une planche ou de 55 mm sur des tubes.

55 cm (21.7 in.) long gooseneck arm for cameras up to 600 g (21 oz.), ball head with 30 mm (1.2 in.) base and 1/4” camera thread. Universal table clamp with clamp range up to 30 mm (1.2 in.) on boards or 55 mm (2.2 in.) on tubes.

Four guiding rails for attaching  Diffusion Screens 5583 or Polarizers 5584 to R1 system lighting units (as of 11/98). For reflector size 20 x 8" (50 x 21 cm).

Is mounted to the Basic Support 5921. Consists of two softlights and holding rods with mounting adapters. Lights can be slid, pivoted and adjusted in height. Vertical holding rods have height marks and can be tilted to different angles. Fitted with two daylight fluorescents each, high-gloss inner finish and high-frequency operating system. Separate control box.

Lamps: 4 x 36 W - Color temperature: 5400 Kelvin - CRI: 90-100
Reflector size: 50 x 21 cm (19.7 x 8.3 in.) (Replacement lamp: 5567)

Is mounted to the Basic Support 5921. Consists of two tiltable softlights, fitted with two daylight fluorescent lights each, high-gloss inner finish and high-frequency operating system. Separate control box.
Lamps: 4 x 36 W - Color temperature: 5400 Kelvin - CRI: 90-100 - Reflector size: 50 x 21 cm (19.7 x 8.3 in.) - (Replacement lamp: 5567)