Acratech Ultimate Ballhead

Acratech Ultimate Ballhead2
Cliquez ici

Acratech Ultimate Ballhead avec boutons caoutchoutés et plateau rapide - Poids 450 g - Hauteur 103 mm - Charge 11,4kg 

 

Toute position de l’appareil est rendue possible par la conception de la rotule.

Usinage numérique de precision.

Shown with left side controls (right side available).

Compatible avec les plateaux rapides Arca-Swiss, Novoflex, Kirk, R.R.S, etc.

Très belle finition anodisée noir satiné.

Se monte sur tout trépied (pas de vis 1/4-20et  3/8-16).

Echelles de degrés gravée.

Made in U.S.A.

La rotule ne bouge pas quand on la serre.

Fonctionnement à sec, évite l’accumulation de poussières et de débris.

Toutes les commandes sont sécurisées et ne peuvent se détacher par vibrations

·  Weighs less than 1 lb (450g) with quick release clamp.

·  Easily holds over 25 lbs (11.4kg) at any angle.

·  Full movements allow any camera position.

·  Precision C.N.C. machined.

·  Shown with left side controls (right side available).

·  Compatible with Kirk, Arca, R.R.S., and many other QR plates.

·  Beautiful satin black anodized finish.

·  Fits all standard tripods (1/4-20 and 3/8-16 threads).

·  Engraved degree markings.

·  Solid precision feel.

·  Made in U.S.A.

·  Ball will not shift when tightened.

·  Oilless and greaseless ball will not attract or hold dirt and debris.

·  All knobs are secured so they cannot vibrate loose and fall off.

 

Acratech GV2 Ballhead

Acratech GV2 Ballhead1
Cliquez ici

Acratech GV2 Ballhead avec boutons caoutchoutés et plateau rapide - Poids 450 g - Hauteur 103mm - Charge 11,4 kg

 

Toute position de l’appareil est rendue possible par la conception de la rotule.

Usinage numérique de precision.

Présentée avec les commandes à gauche (commandes à droite possible)

Compatible avec les plateaux rapides Arca-Swiss, Novoflex, Kirk, R.R.S, etc.

Très belle finition anodisée noir satiné.

Se monte sur tout trépied (pas de vis 1/4-20et  3/8-16).

Echelles de degrés gravée.

Made in U.S.A.

La rotule ne bouge pas quand on la serre.

Fonctionnement à sec, évite l’accumulation de poussières et de débris.

Toutes les commandes sont sécurisées et ne peuvent se détacher par vibrations

Our new Acratech GV2 Ballhead is uniquely designed to function both as a ballhead and as a Gimbal head.

Traditional ballhead designs work well for most photography but when longer lenses with tripod collars are used; it can be difficut to control them. In the past it was necessary to carry a separate Gimbal head or Gimbal attachment for your ballhead. Our Acratech GV2 Ballhead solves this problem by functioning as a Gimbal head simply by rotating the ball into the Gimbal slot on the side of the ballhead. We put a bushing on the stem of the ball and a pin on the bottom of the ball to provide smooth rotation. It provides total ease of use and freedom of movement. Our Ultimate GV2 Ballhead works well with lenses up to a 400 4.0.

 

·  Weighs less than 1 lb (450g) with quick release clamp.

·  Easily holds over 25 lbs (11.4kg) at any angle.

·  Full movements allow any camera position.

·  Precision C.N.C. machined.

·  Shown with left side controls (right side available).

·  Compatible with Kirk, Arca, R.R.S., and many other QR plates.

·  Beautiful satin black anodized finish.

·  Fits all standard tripods (1/4-20 and 3/8-16 threads).

·  Engraved degree markings.

·  Solid precision feel.

·  Made in U.S.A.

·  Ball will not shift when tightened.

·  Oilless and greaseless ball will not attract or hold dirt and debris.

·  All knobs are secured so they cannot vibrate loose and fall off.

Acratech Plateau d'adaptation rapide bouton métal

Acratech quick_release_clamp
Cliquez ici

Plateau d'adaptation rapide compatible avec les plaques Arca-Swiss, Kirk, Wimberly, Really Right Stuff, Foba, etc.

Usinage numérique de précision sur aluminium 6060-T-6.

Très belle finition anodisée noir satiné.

Made in the U.S.A.

Le bouton de serrage est sécurisé et ne peut se détacher par vibrations

Pas de vis de fixation 3/8-16

Version photographiée avec bouton caoutchouté .

Our quick release clamps are compatible with plates from Arca-Swiss, Kirk, Wimberly, Really Right Stuff, Foba, etc.

Precision C.N.C. Machined from 6060-T-6 Aluminum.

Lightweight weighs only 3 1/2 ozs.

Beautiful satin black anodized finish.

Made in the U.S.A.

Knob is secured so it can not come loose and fall off.

Stainless steel fasteners.

3/8-16 thread 2 3/8 (60 MM) long

Shown with optional rubber knob.

Acratech Plateau d'adaptation rapide avec blocage

Acratech detent_quick_release_clamp
Cliquez ici

Le système d'attache rapide Arca Swiss a depuis toujours été considéré par les photographes professionnels comme la meilleure liaison appareil/rotule. Le seul inconvénient de ce système est que la plaque peut être libérée par une manoeuvre inopinée du système de serrage, occasionnant la chute de l'appareil, qui même s'il arrive rarement peut freiner certains photographes devant ce matériel.

 

Acratech a développé un picot monté sur ressort qui vient s'insérer dans l'épaisseur des plaques compatibles du marché (Acratech, Kirk, Really Right Stuff, etc.). Ce système empèche la plaque de glisser complètement en cas de mauvais serrage de l'étau.

Camera specific, Arca Swiss compatible quick release plates have long been regarded by professional photographers as the best method of attaching a camera or lens to a tripod head. The only problem with this system is that if the clamping knob is accidentally bumped and partially loosened the plate and its attached camera can slide out. This rarely actually happens but, the thought of it bothers many users and would be users of this system.

 

At Acratech we have developed a spring-loaded detent pin that projects into the pockets or windows that are cut into the bottom of most manufactures (Acratech, Kirk, Really Right Stuff, etc.) quick release plates. Our detent pin will prevent the plate from accidentally sliding out in the event that the knob is partially loosened.

 

Notes:

 

    * When using this system quick release plates must be inserted and removed by opening the clamp and inserting or removing the plates from the top.

    * Older style plates like the original Arca Swiss that do not have pockets or windows on the bottom can still be used with this system but the detent pin will not be very effective.

Acratech Plaque rapide 1/4

Acratech camera_plates
Cliquez ici
Plaque rapide pour appareil avec pas de vis 1/4

Acratech Plaque rapide 3/8

Acratech camera_plates
Cliquez ici
Plaque rapide pour appareil avec pas de vis 3/8

Acratech Plaque rapide / Canon EOS 5D

Acratech camera_plates
Cliquez ici
Plaque rapide adaptée au Canon EOS 5D


SF