Ewa U-BXP jusqu'à 50 mètres
EWA U-bxp
Cliquez ici

Prévu pour EOS 1D, 1Ds, 5D, et Nikon D1, D1H, D1X, D2H, D2X, D200 avec objectif au filetage maxi 72mm.

Livré avec sacoche de transport jaune imperméable, manuel d'instructions, CD5, mousse de calage, adaptateur AF AV110-P.

Longueur  10cm / 20cm avec tube d'extension

Largeur     22 cm

Hauteur    37 cm

Diamètre frontal         75 mm 

Diamètre de filetage maxi    72 mm max. 

Poids   850 g

 

Les étuis souples étanches Ewa Marine procurent aux appareils photos et aux caméscopes une protection optimale contre l'eau, les embruns, le sable, la poussière et la saleté. Ce modèle permet d'atteindre des profondeurs de 50m et ce grâce à un processus de fabrication et de vérification rigoureusement contrôlé.
L'expérience est le meilleur des savoir faire.
Ces étuis sont montés à partir de feuilles de PVC qui sont testées individuellement avant dêtre coupées, formées à chaud puis soudées.
Chaque pièce est ensuite méticuleusement vérifiée avant d'être déclarée apte à l'immersion.

 

Les sacs étanches photo Ewa-marine sont disponibles pour tous les reflex, avec réarmeur, zoom, flash monté ou objectif autofocus. Leur légèreté, une caractéristique commune à tous les sacs Ewa-marine cache une extrême robustesse et endurance.

Avec un sac étanche photo Ewa-marine vous ramènerez non seulement des images fascinantes du monde sous-marin jusqu'à une profondeur de 50 m suivant le modèle, mais vous pourrez aussi affronter les conditions climatiques difficiles (embruns, humidité, sable, poussière) qui vous obligeaient jadis à laisser votre appareil rangé.

Les détails, tels le hublot en verre optique neutre, le complément AF pour objectifs autofocus et, sur certains modèles, le gant interne de manipulation pour le diaphragme, la vitesse, la mise au point et le réarmement, sont autant de raisons de réussite de vos photos.

The housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate as the camera as its various components and buttons can be operated through the PVC.

The U-BXP is specially designed to fit the bulky, professional digital SLR cameras like the EOS 1D, 1Ds series, or the Nikon D1, D1H, D1X, D2H, D2X, D200 and similar cameras. Smaller SLR cameras then the mentioned above can still be used in the housing.

please note: In this housing you can only use lenses till a maximum filterthread diameter of 72mm. If you are using lenses with a 77mm or a 82mm filterthread, then you must use the U-BXP100 housing.

With this housing, a whole new world of applications opens up for your professional digital SLR camera: Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 50 m / 150 ft.

If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why Ewa-marine housings are so safe to use: implosions are impossible) Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.

The U-BXP housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.

It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket.

 

length   10cm / 20cm with extendet tube ( 4 / 8 inches )

width     22 cm ( 8 2/3 inches )

hight     37 cm ( 14 1/2 inches )

front port diameter         75 mm ( 2 15/16 inches )

lens diameter    72 mm max. filter thread ( 2 14/16 inches )

weight   850 g ( 1,9 lb )

You will receive the following with your new U-BXP :

  yellow carry-case which has a water-proof interior and zippered side-pocket

  manual for Ewa-marine SLR-photo housings

  initial supply of CD5

  specially profiled foam padding

  AV110-P autofocus adapter

 

 

Ewa U-AXP jusqu'à 50 mètres
ewa u-axp
Cliquez ici

Mêmes applications que le U-BXP, pour tout gros boitier reflex tel que Canon EOS 1, EOS 3, EOS 5, 30D, D30, D60, Fuji Finepix S3, S5, Nikon F90, F4, F5, D100, Olympus E1, E500, E510, etc

Livré avec sacoche de transport jaune imperméable, manuel d'instructions, Sachet de Silicagel CD5, mousse de calage, adaptateur AF AV110-P.

Longueur          12cm / 17cm avec tube d'extension

Largeur             19 cm

Hauteur            27,5 cm

Diamètre frontal 75 mm 

Diamètre de filetage maxi 72 mm max. 

Poids               680 g

Same features as U-BXP,

The housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate the camera as its various components and buttons can be operated through the PVC.

The U-AXP is designed to fit almost all common SLR cameras on the market today, irrespective of the manufacturer or model. With this housing, a whole new world of applications opens up for your standard SLR camera: Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 50 m / 150 ft.

The housing is larger than its sister model, the U-AX, for two reasons: Firstly it was designed to take the larger SLR cameras like the Canon EOS 1, EOS 3, EOS 5, 30D, D30, D60, Fuji Finepix S3, S5, Nikon F90, F4, F5, D100, Olympus E1, E500, E510 (please note, that you will need a special adapter for the AV110-X which is available from your dealer or distributor) and secondly the extra volume of air trapped inside the housing allows a dive depths of up to 50m / 150 ft !

If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible) Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.

designed specifically for 35mm SLR cameras, the U-AXP housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.

It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket.

Length 12 - 17 cm ( 4 3/4 - 6 2/3 inches )

Width 19 cm ( 7 1/2 inches )

Height 27,5 cm ( 10 3/4 inches )

front port diameter 75 mm ( 2 15/16 inches )

lens diameter 72 mm max. filter thread ( 2 14/16 inches )

weight 680 g ( 1,5 lb )

  yellow carry-case which has a water-proof interior and zippered side-pocket

  manual for ewa-marine SLR-photo housings

  initial supply of CD5

  specially profiled foam padding

  AV110 autofocus adapter

 


SF